Page 3 of 22 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 211

Thread: Members Bikes

  1. #21
    Join Date
    Oct 2006
    Location
    Bristol CT
    Posts
    2,471

    Default




    2001 sv650,




  2. #22
    Join Date
    Nov 2006
    Location
    Syracuse NY
    Posts
    59

    Default


    1988 Ducati Paso 750, 1 of 55 in the States

    Undergoing surgery for a pair of Mikuni 38mm carbs w/ stage II kit, and an MPB collet kit

    Looking for an appropriate exhaust.

    Otherwise bone stock except for a Euro taillight conversion


    1997 Ducati Monster m750, 1 of 100 non-Cali models imported to the US

    Perf mods:
    Open air-box conversion
    Stage II jet kit
    Termignoni high exit half system
    MBP collets
    Crankcase breather
    Galfer & Fren Tubo S/S braided lines all around
    Vortex Racing clip-ons

    Eye candy:
    C/F this & that
    Ferracci AL turn signal relocators
    Digital CF tach (blech)
    Napolean Baren mirrors
    ---------------------------------------------------------------------------------------------------------------------

    When in doubt, lean further.

  3. #23
    Join Date
    Nov 2006
    Location
    dudley, ma
    Posts
    113

    Default




    94 ex500-
    Penske rear(on order)
    Race-Tech springs/emulators
    Woodcraft clip-ons/rearsets
    EBC front rotor
    Dana Temple Case guards
    Custom Left hand exhaust can courtest of turns 6 and 12
    DNF Racing
    LRRS # 787
    All Ghetto, All the Time.


  4. #24
    Nô§fErÅ†Ü Guest

    Default



    98 Katana 750.
    Mods:

    -Soap
    -Water

  5. #25
    Join Date
    Oct 2006
    Location
    Lincoln, RI
    Posts
    1,030

    Default


    03 z1000
    mods done:
    Matrix Stearing DAMPER
    Corbin front and rear seats(rear not pictured)
    Hindle 4-2-1 full Ti Exhaust
    Power Commander 3
    636 rear shock
    tail lifted 1 1/2"
    zero gravity double bubble
    +2 in the rear sprocket
    rear veiw camera with 2 1/2" monitor with night vision
    636 front master cylinder
    extended kick stand to compensate the tail lift
    clear alternative integrated tail light
    short stalks in the frt
    relocated plate to the batt. box with 4 LED's lighting the plate
    wired for heated gear(have jacket and gloves...some of us ride year round )
    LP carbon fiber frame sliders
    Motosomthing-or-other case sliders
    EBC Kevlar Streetracer clutch
    636 forks
    636 radial brakes with Ti caliper bolts
    SS lines
    EBC HH
    "crispy's" bar end mirrors
    Sylvania Silverstar H7's
    GenMar Risers

    gloss black powder coating done:
    fuel filler ring
    valve cover
    frame sliders(the non-CF parts)
    FI cover
    frame cover
    rear sets, pegs and passenger pegs
    dogbones
    cltch, frt brk, rr brk, shift levers
    linkage
    kickstand
    couple mics bolts

    01 929 erion stock except the pipe



    03 xr50 - the fiddy
    mods:
    82cc kit
    tag big bar kit
    2 bros big pegs
    joker tall seat and cover
    HD spring for a 260lb rider
    fast50 billet wheels w/motard tires
    HD alum rims w/hd spokes w/dirt tires
    white bros exh
    wired for headlight
    rear hand brake
    freestyle pegs
    custom graffics by MsHap :mk_smiley1:

  6. #26
    SpeedGirl Guest

    Default

    No mods yet. Bought the bike with a rebuilt title and cosmetic damages to the front fairing and tail section. The plastics are getting repaired "like new" this winter with a custom paint job.


  7. #27
    Join Date
    Oct 2006
    Location
    West Springfield MA
    Posts
    1,365

    Default




    2004 Yamaha FZ6
    Laser Extreme Quad slip-on
    Fazer fender kit
    Laws that forbid the carrying of arms. . . disarm only those who are neither inclined nor determined to commit crimes. . . Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." -- Thomas Jefferson, Commonplace Book, 1774-1776

  8. #28
    Join Date
    Nov 2006
    Location
    Topsfield MA
    Posts
    1,751

    Default

    Posted in order of purchase

    '00 ZX6R
    Purchased from the original owner on May 21st 2004
    Mods - Programable & Upgradable rider. (Always learning & improving )



    '89 EX500
    Purchased in March of 2005
    Mods -
    Suspension: 17" wheel conversion w/ 2000 EX500 swingarm
    Racetech emulators up front
    Penske rear shock with remote resevoir
    Brakes: EBC front rotor HH pads
    Stainless Steel brake line.
    Chasis: Woodcraft clipons
    Woodcraft rearsets
    frame sliders front and rear
    Bodywork: Airtech body work - upper, lower and solo seat cowl (retains the use of the stock seat)
    Stock exhaust (required to run production twins) with crossover pipe modification (for ground clearance)



    '02 KX250
    Purchased from the original owner on October 29th 2005
    Braking Systems oversized front wave rotor
    Braking Systems rear wave rotor
    Dunlop 756 front tire
    Dunlop 756 RR (Race Replica) rear tire
    Renthal twinwall handlebar (black, Emig bend)
    Renthal top tripple clamp
    Renthal bar pad
    Ride Engineering Honda-style steel braided front brake line
    Factory Connection forks (rebuilt for 165lb Vet C rider)
    Factory Connection shock (rebuilt for 165lb Vet C rider)
    Factory Connection shock pre-load ring
    Fasst Company anti-vibration handlebar inserts
    Factory 909 Velocity gel grips (black/green)
    Factory 909 hand guards
    ASV C5 front brake lever
    ASV C5 pro-perch clutch lever
    UFO front number plate (green)
    UFO side number plates (green)
    FMF SST exhaust
    FMF PowerCore II muffler
    Boyesen ignition cover (spider)
    iCAT
    PowerNow
    Engine ported & polished by JBone Motorworks
    Wisco Pro-Lite piston
    Renthal R1 520 works chain (114 links)
    Renthal sprockets (13/50)
    MSR radiator guards
    Hinson clutch basket
    Moto Tassinari V-Force Delta 2 reed valve system
    Fredette Racing chain guide


  9. #29
    Join Date
    Oct 2006
    Location
    Bernardston, MA
    Posts
    3,017

    Default

    1995 FZR600 - 31,000 miles
    Mod List:
    -FZ1 rear shock
    -Racetech springs
    -RK chain & Vortex sprockets +3 in rear
    -Custom levers
    -Custom front fairing
    -Custom bent fairing stay
    -Custom scratches (right and left sides)
    -Custom zip tie work (yellow & black zipties)
    -Black duct tape

    Just a sample of the custom paint job & duct tape:
    Insert awesome signature here.


  10. #30
    Join Date
    Oct 2006
    Location
    Manchvegas
    Posts
    4,056

    Default

    Too lazy to type in all the crap done so far....

    This bike is deceased, thanks to a bit of crap riding on my part....
    Free dildos for everyone!! Now go fuck yourself.

    2004 ZX10R Streetfighter : Totalled = 2 broken legs, 1 broken ankle, 1 broken pelvis and the knowledge that I am not, in fact, tougher than metal guard rails.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •